# GeoSolver MCP server

> Geolocate photos and GeoGuessr screenshots with clue-based reasoning from roads, signs, vegetation and architecture.

- Listing: https://mcp.tc/i/geosolver
- Connect: use the server's own URL `https://reverseimagelocation.com/mcp` (with your API key); clients connect to it directly. The listing link is a page, not an MCP endpoint.
- Type: remote (Streamable HTTP)
- Auth: API key
- Category: [Utilities](https://mcp.tc/c/utilities)
- Vendor: Reverse Image Location
- Homepage: <https://reverseimagelocation.com/>

## About

GeoSolver is a hosted server that estimates where an image was taken. It reads visible clues such as road markings, signs, vegetation, architecture and terrain, and returns a location estimate with the reasoning behind it. It also keeps a history of past analyses. Results are hypotheses and should be verified independently.

It runs as a remote streamable HTTP endpoint at reverseimagelocation.com/mcp. Calls to the analysis and history tools need a bearer token issued by GeoSolver and an account with the applicable access.

## What it can do

- Geolocate an image from an http(s) URL or base64 data URL
- Get clue-based reasoning from roads, signs, vegetation and architecture
- Review earlier analyses through the history tool

## Example prompts

- "Where was this photo taken? https://example.com/street.jpg"
- "Geolocate this GeoGuessr screenshot and explain the clues."
- "Show my recent GeoSolver analysis history."

## Install

### Claude Code

1. Run this in a terminal, in your project folder:

```bash
claude mcp add --transport http geosolver https://reverseimagelocation.com/mcp
```

2. Start Claude Code and type `/mcp`. **geosolver** should show as connected.

GeoSolver needs an API key. Reverse Image Location’s docs say which header carries it; most servers use `Authorization: Bearer <YOUR_API_KEY>`.

### Claude Desktop

1. Use the `mcp-remote` bridge, which keeps the key on this computer (a connector added on claude.ai with the key under **Request headers** also shows up here). Open **Settings → Developer → Edit Config** and add:

`claude_desktop_config.json`:

```json
{
  "mcpServers": {
    "geosolver": {
      "command": "npx",
      "args": [
        "-y",
        "mcp-remote",
        "https://reverseimagelocation.com/mcp"
      ]
    }
  }
}
```

2. Replace the placeholder with your key and restart Claude Desktop.

The bridge needs Node.js on your computer.

### Cursor

[Add to Cursor](<https://cursor.com/install-mcp?name=geosolver&config=eyJ1cmwiOiJodHRwczovL3JldmVyc2VpbWFnZWxvY2F0aW9uLmNvbS9tY3AifQ%3D%3D>) (opens Cursor)

Or add it by hand to `~/.cursor/mcp.json` (all projects) or `.cursor/mcp.json` (this project):

`mcp.json`:

```json
{
  "mcpServers": {
    "geosolver": {
      "url": "https://reverseimagelocation.com/mcp"
    }
  }
}
```

GeoSolver needs an API key. Reverse Image Location’s docs say which header carries it; most servers use `Authorization: Bearer <YOUR_API_KEY>`.

### VS Code

[Install in VS Code](<https://vscode.dev/redirect/mcp/install?name=geosolver&config=%7B%22type%22%3A%22http%22%2C%22url%22%3A%22https%3A%2F%2Freverseimagelocation.com%2Fmcp%22%7D>) (opens VS Code)

Or from a terminal:

```bash
code --add-mcp '{"name":"geosolver","type":"http","url":"https://reverseimagelocation.com/mcp"}'
```

Or commit it to the repo in `.vscode/mcp.json`:

`.vscode/mcp.json`:

```json
{
  "servers": {
    "geosolver": {
      "type": "http",
      "url": "https://reverseimagelocation.com/mcp"
    }
  }
}
```

GeoSolver needs an API key. Reverse Image Location’s docs say which header carries it; most servers use `Authorization: Bearer <YOUR_API_KEY>`.

### Devin Desktop

1. Add it to `~/.config/devin/mcp_config.json` (macOS and Linux) or `%APPDATA%\devin\mcp_config.json` (Windows):

`mcp_config.json`:

```json
{
  "mcpServers": {
    "geosolver": {
      "serverUrl": "https://reverseimagelocation.com/mcp"
    }
  }
}
```

2. Refresh the MCP server list in Cascade.

Devin Desktop is the new name for Windsurf. It reads `serverUrl` (or `url`) for remote servers.

### Codex

```bash
codex mcp add geosolver --url https://reverseimagelocation.com/mcp
```

Or edit `~/.codex/config.toml` directly:

`config.toml`:

```toml
[mcp_servers.geosolver]
url = "https://reverseimagelocation.com/mcp"
```

GeoSolver needs an API key. Reverse Image Location’s docs say which header carries it; most servers use `Authorization: Bearer <YOUR_API_KEY>`.

### Gemini CLI

```bash
gemini mcp add --transport http geosolver https://reverseimagelocation.com/mcp
```

This adds it to the current project. Add `-s user` to use it everywhere.

### Any client

Most clients accept this shape. Some name the URL field differently: `serverUrl` in Devin Desktop, `httpUrl` in Gemini CLI’s settings file.

```json
{
  "mcpServers": {
    "geosolver": {
      "type": "http",
      "url": "https://reverseimagelocation.com/mcp"
    }
  }
}
```

Zed puts servers under `context_servers` in its settings. Cline needs `"type": "streamableHttp"`, or it assumes SSE.

Client only starts local servers? Bridge it with `npx -y mcp-remote https://reverseimagelocation.com/mcp`.

GeoSolver needs an API key. Reverse Image Location’s docs say which header carries it; most servers use `Authorization: Bearer <YOUR_API_KEY>`.

## Recent changes

- 2026-10-27 11:58 UTC: Tracking started: version 1.0.0. Source: automatic check.

More on the History tab, with descriptions before and after for the newest entries: https://mcp.tc/i/geosolver#history (Atom feed: https://mcp.tc/i/geosolver/history.xml). It records what mcp.tc's anonymous checks saw, every 3 hours where the tool list can be read without sign-in; it is not a security review.

## Details

- Server version: 1.0.0
- MCP protocol version: 2025-06-18
- Last checked: 2026-11-17 (reachable, asks for credentials)
- Listed: 2026-10-27
- Updated: 2026-10-27

---
Source: https://mcp.tc/i/geosolver (mcp.tc is an independent directory, not affiliated with this server's publisher). Corrections: https://mcp.tc/report
